Silabs Driver Mojave Mac Download

  

Hi Everybody!

Do you have a problem with your WiFi in your Macbook Pro? So do I. The vital problem happen with the new Macbook Pro is WiFi connection is drop when USB Type C adapter plugged in Macbook Pro.

To do this, go to the Silicon Labs website. This link will take you directly to the driver download page. This link will take you directly to the driver download page. The source of the USB-UART bridge drivers for the CP210x chips is Silicon Labs. M5StickC - can't find serial port on Mac Mojave. Hi, I've installed the silabs driver and uninstalled and reinstalled and restarted my computer so many times in between. When I run the system report on mac, it shows up as a USB device, but when I list the devices in command line, or when I try to select the port in arduino, it doesn't show.

When unplugged the USB Type C adapter, the WiFi is on again and the internet is running again, and happen for many times. For me, I dont want to afford a very expensive USB Type C adapter, I just bought the cheap one, when I know how to resolve the issue, I’m fine, when I’m not, I’m mad! XD

If you ask what USB Type C adapter I use is Orico USB Hub with 4 USB 3.0 port, I bought for only $10. When I plug to my Macbook Pro 2017 Base Model, the WiFi connection drop and cannot connect at all, refresh and refresh in my Safari browser, I’m so mad and I find the solution using Ethernet connection, yes buy another adapter!

I buy a cheap USB 2.0 Ethernet adapter that can be use too for MacOS, as written on the package and also 10 meter Ethernet cable. So I believe that. So, I take the easy way, I start to plug Ethernet cable to my Router and plug other side to Ethernet adapter, but it doesn’t work, for now. But when I know the installation is not very easy.

Until I realize when I take the packaging to throw it in the trash bin I find the CD Driver, What The Duck??? How I can use it when I don’t have CD/DVD slot in my Macbook! Ok, that is not a big problem, I find the Ethernet Adapter driver and you can get it here, you can download it.

After 5 hours to figure it out how to install USB 2.0 Ethernet Adapter in MacOS Mojave with Macbook Pro 2017, the internet is working fast and stable rather than using WiFi from my Macbook Pro, Scr3w you Apple!

Ok, here is you must to do to start install USB 2.0 Ethernet Adapter in MacOS Mojave with Macbook Pro 2017.

Silabs

STEP 1

Download the driver in here, make sure you have the device same as me, you can see the Product ID of the Ethernet Adapter by going to About This Mac > System Report > USB tree. So the Product ID is Product ID: 0x9700
Vendor ID: 0x0fe6

STEP 2

Unplug all device from your Macbook Pro, unplug mouse, unplug mouse receiver, USB, unplug all of them.

Silabs Driver Mojave Mac Download Free

STEP 3

Restart your Mac then hold CMD+R. Hold it until Apple logo is show up and you can release it. We will enter Recovery Mode in this phase.

STEP 4

Silabs Driver Mojave Mac Download

As you can see the Recovery Mode, look on the top bar, go to Utilities and choose Terminal. We will write some command in here. No harm in your MacBook.

STEP 5

In the terminal window, simply type:

then enter your Macbook Password. After that, restart your Mac by going to Apple logo on the top left.

STEP 6

Silabs driver windows 10

Silabs Driver Windows 10

Your Mac will restart as normal and in this phase we will install the USB 2.0 Ethernet Adapter Driver for MacOS. Download it here.

STEP 7

Extract the folder named RD9700 Ethernet driver x86_64.zip, look the folder inside named x86_x64, install a program named USBCDCNET.pkg. After that, begin to restart again your Macbook.

STEP 8

Silabs driver mojave mac download free

After restart, open the Terminal by holding Command + Space key together, and type Terminal. Then copy and paste this code in the terminal: (if not working to paste, just typing manually)

After that, Restart again your Macbook.

FINAL STEP

The final step is to begin plug your USB 2.0 Ethernet Adapter to your Macbook with your USB Type C Adapter and go to System Preferences > Network, click a plus icon on the bottom to add Ethernet connection.

Open your browser to test the connection. You can simply look on the Ethernet adapter will start blinking many times with Red Light, if that so your internet is working.

Now you don’t have to worry again your Internet connection is drop. I always use this in my home with my fast internet connection, see yourself the different using WiFi connection and Ethernet Adapter in your Macbook Pro.

Note: Report to me by comment below if the download link is not working and tell me anything related this topic.

Howdy, everyone!

Freemacsoft

M5Stack noob here. I've recently started playing with my M5Stack Faces Dev Kit. The device seems to work correctly. It boots into the micropython repl.

I've downloaded and installed the latest MacOS driver from silabs (https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers), and then installed the latest uiFlow Desktop IDE.

With the device connected to my Mac via the provided cable, when I open the IDE, it lists the device, but fails to connect.

I'm not sure how to proceed now. Please let me know if there is any other information I need to provide.